Samsung Galaxy S4 LCD Screen and Digitizer Assembly
Samsung Galaxy S4 Replacement Battery
Adhesive Strips
Tools Required:
Small Phillips Screwdriver
Safe Open Pry Tool
First step is to completely power down the device and remove the battery cover using the safe open pry tool
Remove the battery and SIM card and/or Micro SD card
Next you will need to remove 9 Phillips screws which are located in the image below
Figure 1 back housing screw locations
Using a safe pry tool, gently lift the speaker assembly from the retaining clips on the bottom of the deviceNow we are ready to remove the front bezel. Slide your pry tool slowly around the perimeter to release the clips
It is now safe to remove the back housing
You will now need to release the 8 connections that are circled in the image below
Figure 2: connector locations
Remove the metal shield that is covering the charging port
You can gently remove the charging port flex cable which is held in by a bit of adhesive
Remove the long antenna on the right side of the device
The motherboard is being held in by one small Phillips screw and once removed the motherboard with camera can be removed
Once the motherboard has been removed you can then start removing the vibrating motor, headphone jack, front facing camera, proximity sensor and the earpiece speaker
Figure 3 Motherboard removed
I truly get pleasure from while I read your blogs and its content.Phone parts
回复删除