Tips for Repair Your HTC One

This seamless aluminum design makes the HTC One almost impossible to repair because the plastic bezel surrounding the aluminum rear housing is glued strongly. Now we challenged ourselves and have done the following HTC One teardown step by step. But we damaged the HTC One LCD screen and digitizer assembly during the disassembly and it is highly recommended to let people with professional skills to do this.
HTC ONE X lcd original

Tools needed:   Small Phillips Screwdriver  Tweezers   Case Opening Tool
1. Turn off the phone.

2. Pry out the LCD assembly of the HTC One. Insert the case opening tools into the gap between the rear housing and the motherboard, then separate them.

3. Take out the black retaining bracket, open 5 connectors, then remove 2 antennas.

4. Undo 4 screws with the help of Small Philip Screwdriver.

5. Use tweezers to disconnect 2 antennas.

6. Use Tweezers to pry up the vibrating motor.

7. Disconnect the flex cables on the motherboard, take out the flex cables.

8. Undo the 4 screws on the motherboard.

10. Take out the motherboard carefully.

11. Undo 2 screws, then remove the USB metal shield.

12. Undo a screw, take out the loud speaker assembly and charging port flex cable.

13. Undo 3 screws and take out the PCB board.

14. Peel off tapes, disconnect connectors and then remove the front facing camera and rear facing camera.

15. Use case opening tools to pry up the battery

16. Separate the HTC One LCD Screen Assembly from the front housing.

17. Peel off the tape on the front housing, then take out the SIM card tray.

18. Use tweezers to take out the loud speaker.


We also have made a disassembly video of HTC One, welcome to watch it.